About superrob1

superrob1 · 02-16-2007

My inquire is I am trying to understand why this works.I have 4 internal routers (2620) connecting directly to a switch (2900XL) the switch is directly connected to a server running OpenBSD 3.9. The server has 2 NICs it is setup as a bridge. The NI...

superrob1 · 01-14-2006

I having diffculty configuring routing between vlans I have configured.Setup:SwitchCatalyst 2900XL IOS 11.2(8.6)SA6Switch IP VLAN1 192.168.0.90Router 2620 IOS 12.3(15a) I have configured the vlans 1 thru 4 on the routervlan 1: 192.168.0.0vlan 2: 192....

superrob1 · 02-17-2007

Hi, The Server is setup as bridge to allow traffic to pass from one network to other network. No routing is done by the Server. This is done to watch different going from network 1 to network 2 and vice versa.Now I see where my error was, thinking ...

superrob1 · 02-16-2007

version 11.2no service padservice timestamps debug datetime localtimeservice password-encryptionno service udp-small-serversno service tcp-small-servershostname SuperSwitch_1spanning-tree vlan 1 max-age 200spanning-tree vlan 1 hello-time 10spanning-t...

superrob1 · 02-16-2007

Yes in the orignal setup the inner_routers can ping NIC_1 of the Server.There is 15 seperate Vlans All the ports on the 2900XL are set to allow all the vlansThe internal routers are all in the same network range of 10.10.100.xxx. NIC_1 of the server...

Member Since	‎03-26-2002 12:48 PM
Date Last Visited	‎03-15-2023 06:45 PM
Posts	5

User Statistics

User Activity

Trying to Understand

VLAN Routing Issue

Re: Trying to Understand

Re: Trying to Understand

Re: Trying to Understand