When i configure Unity express 3.2 initialization wizard, i can see GUI for Call manager and not for CME , Is there any version related issue or do i have to use Unity express which is compatible with Call manager Express 7.1 ?
Hi,If i use CME , can i configure web interface ?The reason is before i configure Unity express, it has to have call manager web interface.Thanks in advance,Janaka
Hi i have configured web vpn on cisco asa 5510, and able to access Exchange server for OWA.additionally i have Fortigate and fortinalyzer in the same inside lan same as exchange server.However i cannot access them.when access fortinalyzer, login page...
we have a two ISP solution, using cisco 5505 and work fine with tracking.(route outside 0.0.0.0 0.0.0.0 a.b.c.d 1 track 1)We have site to site VPN and this use Primary ISP's IP.Now we need to configure the same with ISP2 IP , incase ISP1 is done, we ...
HiDMZ=172.16.10.0/24Inside=192.168.10.0/24how to access inside lan (192.168.10.20) from server in th DMZ (172.16.10.5)I tried bellow but no luckstatic (inside,dmz) 172.16.10.5 192.168.10.20 netmask 255.255.255.255access-list dmz_access_in extended p...
Hi Rob,What you mentioned is correct.The current license is CCM.We need to buy the CCME.Is there a way i can download CCME license as cisco TAC not helping much on this.Can i install this license using clean installation method ?Regards,Janaka
Thanks for the advise,we will buy additional license later if this success.My problem is why i cannot access fortigate where as i can access exchange OWA.is it something to do with SSL cert or Fortiget block traffic from ASA.(Both Fortinet and exchan...
So you mean to say, once we configure L2L using intface "outside" (IP from ISP1), we can also configure the same L2L to fall back with ISP2 for interface "backup"--Is it just apply isakmp enable outsidecrypto map outside_map interface outsideandisakm...
