I have a Cisco ASR 9006 chassis running 5.3.4 with the following line cards:
A9K-RSP440-TR (Typhoon)
A9K-24x10GE-TR(Typhoon)
A9K-8T-L (Trident)
I need to add a A9K-8X100GE-TR (Tomahawk) to the chassis. We have other routers with 5.3.4 and a mix o...
Our engineering staff has been asked to provide QoS priority for multicast video over an ASR 10G backbone network. We use sub-interfaces to separate Internet, video, and MPLS traffic on our backbone. What is the best method to provide QoS priority fo...
We have used the Cisco 7600 as a combination router and switch for many years. We recently began replacing the 7600 with the ASR9000 chassis for L3 routing functions. However, we are not convinced the ASR is the right choice for L2 switching. I am lo...
We have used the Cisco 7600 as a combination router and switch for many years. We recently began replacing the 7600 with the ASR9000 chassis for L3 routing functions. However, we are not convinced the ASR is the right choice for L2 switching. I am lo...
Pradeep,
That is great news! This is the XML. I tried several variations of the OID. It did not work but maybe you can tell me what I did wrong.
<?xml version="1.0"?>
-<interface>
<name>Get Cisco IPv6 Traffic Counter (64-bit)</name>
<description>Que...
We use the ASR9000 L2 for unicast applications with very few issues. We ran into issues when creating L2 access ports on the ASR and feeding multicast video to video equipment connected to the access ports. We use sparse-mode with SSM, IGMPv2 with st...
You are correct. The process is manual and would not be efficient if you have a great number of interfaces to graph. In my case, we were only interested in graphing IPv6 traffic at our up and downstream interfaces which added up to 20-25 interfaces t...
Yes, I created that template, however it is a copy of the default "SNMP - Generic OID Template". You can use the generic or create a separate one for IPv6.
Jamie
