I want to add a CSS 11503 as an inline to a router ethernet port to intercept all TCP traffic. What additional configuration is required to make this CSS act as a transparent proxy and initiate the sessions and start them with its IP.
I am having an H.323 trunk between 2 Access servers in 2 different locations, will the IP phones on one location need to communicate with the access server on the other location or it will be just communication between the 2 access servers?
I would like to know if i can establish a point to point IPSec Transport mode tunnel between two routers with Firewalls perfoming static NAT along the path. i.e.: Does the NAT deny the availability of having a transport mode IPsec tunnel between the ...
I have a CSS11501 with two VLANs. The problem is that the two VLANs are connected to 2 different F/W interfaces that connect them to the Internet. I need to have 2 default routes (One for each subnet) each depending on the source traffic "i.e.:each s...
Hi There,Thanks for the info. The router sends traps indicating that the tunnel went up or down but i can't find in the trap any identifier to the VPN that had a change in the state incase of having multiple tunnels on the router (like peer addr or e...
Hi estill,Are these traps generated from the router the Tunnel start and Tunnel stop traps?If yes, do you know if these traps can identify the remote peer that went up or down?