I have a 262o router with 1 T1 line as my primary and 1 wic-1enet as my backup connection. both setups have sep ip networks. My pix is setup to work with my primary T1 connection. Is it possible to static map inside outside ip's from the secondary...
I have a 3550-12g with 2 servers with secondary nics connected to it. I put these 2 connections in a vlan. I can ping the switch form these 2 machines but NOT each other and not ping the interfaces form the switch. I think the reason i can ping th...
My problem is i can not for the life of me get my pc on the 2950 to grab a DHCP addy from the server. 2950 is on port gig0/1 on the 3550 adn is routed to 192.168.1.1 the dhcp server is a win2k box on the 5.0 net with addy 192.168.5.1. included is ...
I have 3550-12g with one port witha routed ip 192.168.1.1. the 3550 itself ois 192.168.5.22. the por tis a 1000bt gbic. there is a 2950 attached tot his port. And 1 pc on it as a test. the 2950 gateway is 192,168,5,22 which is the 3550 switch. ...
I am planning on using 3 2950 48 port switchs connected to a 3550 switch using GBIC 1000bt and route 3 subnets to reduce bandwidth consumption. I have found a great deal on 1000bsx GBIC's and was wondering if there was any difference in speed or co...
i have connectivity no problem. with static ip's the net is fine. I have also done a debug and it looks like the 3550 is forwarding to the correct win2k dhcp server. I have verified my dhcp superscope but it seems that the 3550 is either not recei...
Yes thats exactly what i mean. and yes my switch's support them as i have already been using the copper GBIC's. Which leaves a ? in my mind as to why people would want to use fiber at more cost thatn copper.