Hi All, I've configured ssl/web VPN on a cisco 1941 however when I try to connect no page displays.. It simply just times out... We are running a Cisco 1941 + Security... IOS = Version 15.0(1)M2 (c1900-universalk9-mz.SPA.150-1.M2.bin)Running conf...
Hi,
You are not alone
I am experiencing a similar issue with a SG220-26P however the errors occur predominantly on the uplink interface. Other interfaces also report errors but low in comparison. The switch on the other side, SG300-28PP, doesn't re...
Hi, Disabling MFP didn't assist with stability.I ended up disabling spanning tree and also 80mhz channels in 5ghz mode. The WAP's have been stable for nearly two weeks.The model of switch I have supports 802.3af. From what I read when using 80mhz t...
Thanks Eric, I have made those changes on both AP's. I will let you know if it improves.My issue is mainly that I lose LAN connectivity but the wap keeps broadcasting. Im also unable to ping the waps when this happens.If you require any logs/additi...
Hi James, Have you been able to resolve this issue ? I am experiencing the same issue with 2 x wap371's connected to a cisco SG200-50P.SSID is being broadcast but no LAN connectivity. The AP's are not clustered and I have disabled green ethernet set...
Hi, I've experienced a similar issue with the wap321.Devices would connect/disconnect/reconnect frequently, show connected but no traffic would pass. The windows devices would just show up limited connectivity but then sort themselves out then go ba...
