Same issue as the thread below (but I didn't want to hijack it with my own issue):
https://supportforums.cisco.com/t5/smart-net-total-care-portal-and/inventory-deleted-now-unable-to-view-any-information/m-p/3382844
Summary: Deleted inventory, and...
Hi all,
I'm having a hard time explaining some behavior that I'm seeing on a new UCS Mini, and was hoping one of the experts here would be willing to share some insight.
Sorry for no diagram, but this is a new system and we have a pretty simple t...
Yes, the packet size on the Gold class is set to 9000 (even before I set it for Best Effort), I have associated this class with a storage QoS policy, this policy is assigned to the appliance ports and the storage vNICs, and the vNICs themselves have ...
I added an Appliance Port to each FI and crossed them over to the opposite storage processor. At this point, neither FI should have to send traffic to the upstream switch to reach either storage processor. I did that in hopes of solving this issue ...
@Sandeep Singh wrote:
Hi
The appliance port traffic will never traverse the Uplink ports, the reason same VLAN is required to be configured and it appears to be pinned to an uplink port, is how the appliance port is treated internally within UCSM (...
@Wes Austin wrote:
Did you create VLAN 20 in the appliance cloud and in the network cloud under the LAN tab in UCSM?
Yes, VLAN 20 exists in both the LAN Cloud and the Appliance Cloud. Unless VLAN 20 was allowed on the Uplink Port, the iSCSI vNIC...