About tinu_karki

tinu_karki · 05-08-2014

We have an ISE deployment where we are looking to use EAP-FAST as our authentication method with EAP-TLS as the inner method. We are checking both machine and user certificate. We initally had the following condition in our AuthZ rule -> EapChainingR...

tinu_karki · 03-12-2013

We currently have a QoS policy as per configuration below:!!policy-map QOS_POLICYclass VOICE set dscp ef police cir 12800 bc 8000 conform-action transmit exceed-action drop!!I wanted to increase the CIR, the BC and also change the exceed a...

tinu_karki · 03-26-2012

Had a question regarding OSPF fast hello. Lets say i configure fast hello on an interface using the command:ip ospf dead-interval minimal hello-multiplier 5This means my dead interval is 1 second (this value never changes)This also means 5 hellos are...

tinu_karki · 07-21-2011

Noticed on one of our routers that there are routes in the database but no RIP routes in the routing table. Routing is also running BGP. Not sure I understand why this is occuring. Output below:RouterA#sh ip rip database0.0.0.0/0 auto-summary0.0.0...

tinu_karki · 11-11-2010

Hi,I am currently trying to find a book or video mentor series to familiarise myself with the ACE module a bit more. I know there is an exam that revolves around the product (642-975 DCASI) but i cant find any cisco press books and it seems the only ...

tinu_karki · 05-04-2016

@otwilliamsI was also in the same boat as you but as per Marvin Rhoad's suggestion i did a clean install with 3.1 instead of messing around with multiple updates. So far no issues and 3.1 has been running well so if a clean install is feasible for yo...

tinu_karki · 04-27-2016

@marvin.rhoadsThanks, i will give that a try. I will go for a clean install with 3.1 as a lot of my experience of upgrading with prime infrastructure or prime LMS over the years has been very painful.

tinu_karki · 04-26-2016

Hi Govasrin,I have the exact same issue as the OP. Could you please make 3.0.2 available for download for me as well. I need TP 1.0.3 as this is the only patch that is compatible with our version of WLC's. Thanks in advance

tinu_karki · 04-02-2015

Andy,Not sure if you still have this problem but we have a similar issue. As you know the ASA cannot generate a CSR with SAN attributes. The solution for us was to create a the CSR using OpenSSL and then get it signed and imported on to the ASA.

tinu_karki · 05-08-2014

Thanks that is working fine now as per your suggestion

Member Since	‎02-19-2006 02:45 PM
Date Last Visited	‎11-15-2019 12:03 AM
Posts	20
Total Helpful Votes Received	5

User Statistics

User Activity

Authorization rule for EAP-FAST (inner EAP-TLS)

Policing QoS - 4500 Sup7

OSPF fast hello query

RIP routes in database but not in routing table

Learning resource for ACE

@otwilliamsI was also in the

@marvin.rhoadsThanks, i will

Hi Govasrin,I have the exact

Andy,Not sure if you still

Thanks that is working fine