HelloCan anyone help with a config issue I have.A customer has requested REST API access onto their N9Ks using the role=nxdb-admin.All access to the N9Ks is via TACACS using an ISE running 2.4 I have tried to setup a new TACACS profile on the ISE for...
Hi
On a WLAN network for one of our customers we only allow APs to connect if they authorise against a AAA radius server using the mac address of the AP ethernet interface as the username and password. Currently we do this using an ACS as the AAA rad...
Hi
On a WLAN network for one of our customers we only allow APs to connect if they authorise against a AAA radius server using the mac address of the AP ethernet interface as the username and password. Currently we do this using an ACS as the AAA rad...
Hello
I am looking for advice on how to configure a WLC to use dynamic VLAN assignment when the access points are in flexconnect with local switching.
We have a central 8510 and APs at several remote locations. Each AP is trunked locally at the site ...
HelloDoes anyone know what the rough rule of thumb would be for per user bandwidth on an AP, assuming its connected on a 1Gig port and is a 2600/2700 type API am sure I read approx 500K per user in the past ThanksMartyn
We are trying to understand the additional WAN bandwidth we would need if WiFi is installed where users can be corporate of guest (guest would have web access only)I am only looking for a rough guide, nothing too scientific, so that we can let the cu...
timWe never got round to implementing it, instead the customer chose the option of HA in a single data centre with a N+1 8510 in a different DC.I did get a reply from Cisco saying that running the HA/redundancy link over OTV should be OK - belowOTV i...
Thanks ScottDo you know if... you are running a standard image Prime with maps and aps positioned etc that these can be restored onto a new Pro image from a standard image prime backup.what about all the licenses for APs, MSE etc. Do all these need r...
Hi ScottI was sent this link that says its OK to use OTV for the HA link but obviously we need to test ithttp://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1130-ag-series/qa_c67-714540.html?cachemode=refresh
