Hi,We need to implement Wireless network in a Villa - the scenario is: We need 3x Access Points (indoor) to be connected wirelessly with the main AP unit (connected with PoE switch and then Internet router). There is no line of sight for these 3 APs ...
Hi,I have MCS7816I5-K9-CMD2 server and I have installed Unity Connection 8.5 in it. We need to get Voicemail enabled for at least 10 connections. What is the required license for this?Thanks,Syed
Dear All; We have 2911 ISR 2 Router and also we have : "EM-HDA-6fxo" quantity = 2 EVM-HD-8FXS/DID quantity = 1 VIC2-4fxo quantity = 2 my question : is this configuration enough to support 30 analog PSTN...
Dear All,My company need to configure auto-attendant on existed CUCM 8.5 server, and we don't want to purchase another extra hardware. is it possible to configure auto attendence on CUCM without any extra haraware ? Thanks in advance . Rashed .
Dear All I want to install unity connection 8.5 on the follwing HP server "HP Proliant DL180G6 E5606 2.13 GHZ 4 Core, 1x2GB Memory, 1x250GB, P410, 2U"is this server suitable to install Unity connection. Thanks in advance. Rashed.
Hi Ariqalabib,It depends which AP model you are using.With Single Point Setup deployment is easier and faster. This helps to enable thewireless LAN to scale up to four WAP121, up to eight WAP321 devices, and up to16 WAP551 or WAP561 devices in order ...
Hi,I have been looking for this solution - please let me know the configuration required in other APs connected to the main AP wirelessly.Also, please refer to the diagram attached and help me figure out if the Cisco SMB 321 will work.Thanks in advan...
Thanks Scott,I understand that we can use one radio for the bridging and other for client access. But can we still use other APs connected via cables? (as mentioned in the diagram I attached).Can I have GUI based configuration guidelines please?BR,Sy...
