Hi Asif,Please check the following link ( http://www.cisco.com/en/US/docs/solutions/SBA/February2013/Cisco_SBA_DC_UnifiedComputingSystemDeploymentGuide-Feb2013.pdf ) to understand how separate FCoE and Ethernet Uplinks are setup. With vPC setup (for ...
You configured ( aaa authentication login default group RadServer local )Try ( aaa authentication login default group RadServer )From N7k Security Guide - The local keyword is not supported (and is not required) when configuring AAA authentication ...
Do you have a SFP transceiver inserted in Port FC1/15 ?Do you have any FC link inserted in SFP (Port FC1/15) and is it connected to another switch ?If you do not have any FC link and you only have the SFP transceiver inserted, remove the SFP transcei...
Erik,Can you check the deployment guides from links pasted below - http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns743/ns1050/landing_flexpod.htmlhttp://www.cisco.com/en/US/docs/solutions/SBA/February2013/Cisco_SBA_DC_NetAppStorageDeployment...
Looks like you have inserted a SFP into port fc1/15, but you have not run a fc link from fc1/15 on MDS to another switch.If you remove the SFP, "show int bri" would show status of port as "sfpAbsent", and "show interface fc1/15" will show up as "SFP ...