Hi,I'm fine tuning some of our ASA logging config, and am having an issue with one particular syslog ID.The message is: syslog 106100: default-level informational (enabled)and the log settings are:Syslog logging: enabled Facility: 20 Timestamp ...
My customer is currently testing HTTPS inspection by only redirecting for the IP address of one user. I know they were having different experiences with different browsers etc. They are only using self signed certificate on the ironport which means y...
Scott,I have one default route on my management interface. In my case this is vlan2. You can only manage the ironport on one interface and this needs to be untagged on your trunk port to the switch. So in my case I made vlan 2 the native vlan for th...
Hi Scott,I configured the WCCP on the ASA as follows.access-list wccp-traffic extended permit tcp 192.168.1.0 255.255.255.0 any eq wwwaccess-list wccp-traffic extended permit tcp 192.168.2.0 255.255.255.0 any eq wwwaccess-list wccp-traffic extended ...
Hi Guys,I have come across the problem twice now. Once following an upgrade to 5.1(3)N2(1b) in a live environment. In the live envoronment we had L3 routing modules installed in the Nexus 5k's. We have the peer keepalive configured as a port-channel...
Hi Guys,I got around this issue by configuring my Ironport interface as a dot1q trunk and giving it a L3 interface in each vlan. I then can re-direct on each ASA interface. Thanks