We are using Cisco Customer Directory Configuration Plugin to generate the user directory in CallManger 4.13 from active directory. We are planning on using the BAT to import about 250 phones. Is there a way to do a bulk association of these phones ...

We have people using the 7960’s with the 7914 side cards.There are shared line appearances on the side cards that the secretaries are covering the managers with. If a call comes in on one of the shared line appearances the light flickers amber. The...

Need some help please.I have two 2950T-24’s. SW1 and SW2. They are connected via an ether-channel bundle with 802.1q trunking between the two. I have a router plugged into each switch. R1 plugs into Fa0/3 of SW1 and R2 plugs in Fa0/3 of SW2. There is...

The tunnel is established and I am seeing traffic being transmited and encrypted but nothing received.Anyone know if this a routing issue or a config issue on the PIX running 3.3.ThanksPat

I have read the article on this on the site.http://www.cisco.com/warp/public/63/showrun.shtmlI understand the security impecations.With that said does anyone know of a way to have a user view the entire router configuration (show run) with out having...