About Paul Heilmeier

Paul Heilmeier · 02-22-2013

Hi Guys,i configured ldap, for authentication, on a Cisco 1921 with the c1900-universalk9-mz.SPA.151-4.M4.bin Image.I configured an LDAP connection, and it works fine. except after few minutes, if no one auth, the ldap connection is lost,and it goes ...

Paul Heilmeier · 12-31-2013

Maybe to late. But google direct me to this thread....I have the same issue, and found the solution:https://supportforums.cisco.com/thread/2232031

Paul Heilmeier · 12-16-2013

Unfortunately not...i opend an SR, the result of the BU was "it isn't an Cisco fault, maybe the CTI Application stores a wronge IP Adress in the cache and doesn't release them, also not after an update".An restart of the CTI Service on the CUCM coul...

Paul Heilmeier · 11-26-2013

Hi,do you have maybe an sample config for Entereasys and ACS 5.X, or an short guide?We try at the moment the same.MAC Authentication against Cisco ACS with Enterasys.But nothing works.Even if the ACS denied the access, the Enterasys didn't disable th...

Paul Heilmeier · 10-30-2013

Hi,are youe add the ASA inside IP as an route to Fritzbox, so the Fritzbox knows with which way they can reach the ASA?If you are able to configure the Fritz.box, you could try to use the fritz.box as an Modem, and use the PPPOE from ASA,so the ASA g...

Paul Heilmeier · 10-28-2013

Hi Amit,looooooooong time ago your post.Can only acknowled your issue, with CUCM 8.6.2a(SU2)We are using EM & CIPC 8.6.3.0, and sometime (but really really rare) the user get the message "out of service 58". If the same EM use a other device it work...

Member Since	‎02-22-2013 08:15 PM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	7
Total Helpful Votes Received	5

User Statistics

User Activity

IOS LDAP connection Time outed

SG300 Link Aggregation and Wake On Lan

Internal telephony error 58

ACS 5.3 and Enterasys A2 switch support

ASA 5505 behind Router

Internal telephony error 58