About nap.deguzman

nap.deguzman · 02-24-2016

Hi Guys, I am trying to establish the connection between 6880VSS pair and 6800IA using this SFP+fiber cable (SFP-10G-AOC10M) but the interface does not come up. I used a separate 10G SFP and separate fiber cable and it works fine. My 6880 version is...

nap.deguzman · 02-11-2016

I am trying to get the exact model of our FWs in the remote location and can't confirm if it is x model using show version. Anything specific that I should look at from the show version output?

nap.deguzman · 09-10-2015

Hi Guys! Trying to establish this VPN connection to our new client but the client refuse to provide public IP and our policy disallows routing to a private subnet. So what I did was configured a one to one NAT so that any traffic destined to the clie...

nap.deguzman · 03-23-2015

Hi Guys, Anyone who can help me verify if this setup will not have any issues? 4500-X G1/1 ---------------------------------------Non-Cisco Devicespeed nonegotiate Speed 1000/duplex full

nap.deguzman · 03-20-2015

Guys, I just need some clarification on the use of the bgp weight attribute. Let us say I have this setup. If both R1 and R2 are receiving the same set of routes from R3-R6, can I use weight attribute to influence the received routes so that R1 will ...

nap.deguzman · 02-24-2016

Thanks Mark, I upgraded the IA IOS and it works fine now!

nap.deguzman · 02-24-2016

Thanks Guys! appreciate the help!

nap.deguzman · 03-23-2015

Hi Aaron,Thanks for your response. I am moving the connection from the existing 3750SW to the 4500X switch but I don't want to involve the team that manages the non-cisco device. The existing 3750 has the interface set to 1000/full, the problem with ...

nap.deguzman · 03-23-2015

Hi, Thanks for your reply. The routers have selected a better path for the routes that is why I wanted to know why these metrics were not selected. My question here is, will the metric from the router eigrp command be added on the route map metrics?

nap.deguzman · 03-23-2015

Thanks for the clarifications Guys!

Member Since	‎01-19-2015 08:39 AM
Date Last Visited	‎09-26-2018 11:27 AM
Posts	26
Total Helpful Votes Received	5

User Statistics

User Activity

Using SFP-10G-AOC10M to connect 6880 to 6800IA

How do I determine if the ASA is x-model from CLI?

ASA VPN Outside NAT

Connecting 4500-X to a Non-Cisco Device

BGP Weight Attribute

Thanks Mark, I upgraded the

Thanks Guys! appreciate the

Hi Aaron,Thanks for your

Hi, Thanks for your reply.

Thanks for the clarifications