About Mohammed Al-Assadi

Mohammed Al-Assadi · 06-05-2009

many people asking about the requirements of the cables to support IPT.So, Is there any recommendation from cisco regarding the cables like:( Do not use IPT and PoE with Cat5 cables)????

Mohammed Al-Assadi · 06-04-2009

Hi all,Any body can tell me how we can utilize the next NIC card on MCS servers.Because I have on each server two NIC cards and I need to connect each card to switch, is that possible?

Mohammed Al-Assadi · 06-04-2009

I have VG connected to PBX via FXO ports.I can place call from Cisco to PBX but I can't make call from the PBX to VG.the PBX programmed as the following:the user on PBX phone should press code to hunt to one of the free FXO ports. the user will hear ...

Mohammed Al-Assadi · 06-03-2009

I have in project many 7835 servers.Is there any difference between them?or I can Install CCM and Unity on any of them?

Mohammed Al-Assadi · 05-27-2009

I tried to configure 7916 with ccm6 but i found just 7914.so i downloaded:cmterm-7916.1-0-3.cop.sgnbut I could not uploaded to ccm any help please??

Mohammed Al-Assadi · 07-18-2017

Do you mean Spark Room Kit? For Room Kit, it will be based on the Part Number: CS-KIT-MSRP-K9 ==> Cisco Spark registration CS-KIT-K9 ===> for registration to VCS, UCM and 3rd party call control

Mohammed Al-Assadi · 01-03-2016

You have to check the matrix first. You did not give us the version of your IOS or CME. maybe you need to upgrade first. However, after determining the required files you can download it from here: https://software.cisco.com/download/release.html?m...

Mohammed Al-Assadi · 01-03-2016

Please try this link: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/33matrix.html It gives you the firmware that you should use based on your IOS version. find it then download the files.

Mohammed Al-Assadi · 03-19-2015

Hi,In general you have to allow traffic between:Avaya phone and Avaya server; andBetween the two endpoints, calling and called. In many cases security engineers allow traffic between voice VLANs and servers. But they do not allow between voice VLANs.

Mohammed Al-Assadi · 03-19-2015

Hello,Is it Cisco VGW?172 dsp error.

Member Since	‎12-08-2007 10:35 PM
Date Last Visited	‎07-29-2020 12:06 AM
Posts	72
Total Helpful Votes Received	14

User Statistics

User Activity

IPT cabling requirements

The second NIC card on MCS server

Problem in communication between VGW and PBX

MCS7835 difference

expansion module 7916 with CCM6

Do you mean Spark Room Kit?

You have to check the matrix

Please try this link:

Hi,In general you have to

Hello,Is it Cisco VGW?172 dsp