About marianofarre

marianofarre · 10-07-2010

Hello there, I have a customer in CM 4.2 and needs to upgrade to 8.0 with server replacement as well. Can anyone please, provide the link to the latest Ordering Guide? The one I do find is for version 7.1. Also, I can´t find the upgrade path for this...

marianofarre · 06-06-2013

This was a while ago, and the "adapter" was made for a client (which I can not longer review the pin out and how it was made, unfortunatelly).At that time, I found out that I needed an external power, but it happened to happen that worked the way it ...

marianofarre · 06-05-2013

Hi Darren, Since the Ceiling MICs don´t have MUTE Control Button, it was not a problem. GND and Microphone Control may be shorted, but they are signals not Voltage, so no QuickSet C20 damage were caused nor MIC was muted due to this. I have two MICs...

marianofarre · 04-24-2013

Hi Scott,PVDM3 is limited, in terms of multipoint video facility. Desktop sharing is not supported. You need to go with an MCU. Kind regards,Mariano.

marianofarre · 09-20-2012

Alexandra, in my particular case, I made an adapter using a 3 pole minijack (since I couldn´t find a 4 pole one); but considering pin-out of the minijack and the cannon connector (XLR) it worked fine. I used a C20 with two ceiling mic. The same thing...

Member Since	‎03-14-2006 05:25 AM
Date Last Visited	‎05-31-2023 12:02 AM
Posts	9
Total Helpful Votes Received	5

User Statistics

User Activity

CM 4.2 to CUCM 8.0 upgd

Re: 3rd party microphones for Cisco Telepresence

3rd party microphones for Cisco Telepresence

Are PVDM3 DSPs supported for multipoint call escalation for Cisc

3rd party microphones for Cisco Telepresence