Hi folks,
Im facing a strange issue: I do have an customer who is using 10x SPA504G and one SPA112 with two analog phones connected. Both the phones and the ATA are on the same network. There are no audio problems with the SPA504G's.
Unfortunately ...
Hi folks,At the moment im researching a feature one of my customers would like to have. It's like this:They're using an old Siemens PBX system at the moment. When they close the office the receptionist puts the PBX in night-mode so all incoming calls...
According to the SPA500 Admin Guide, a LDAP query will search on every letter: "This searches for the text string anywhere in the beginning, middle, or at the end of a name."Would it be possible to search only on the first letter of a name?Erik
Hi folks,One of my customers does it's LDAP search queries based on the "company" field. In the result I can display OR the name of the contactpersonen with the corresponding phonenumber OF the company name with the corresponding phone number. The fa...
Maybe some of you have already noticed it, firmware version 7.5.5 is available:http://software.cisco.com/download/release.html?mdfid=282724650&softwareid=282463651&release=7.5.5&relind=AVAILABLE&rellifecycle=&reltype=latestLanguage files:http://softw...
If the outbound number matches the address book the phone will display the right name. You have to disable "display update" in freeswitch (im not sure wich setting it is) otherwise freeswitch will change de display name to "outbound call"
Hi Folks,thanks for the answers. I think I will go for the BLF method. This way you can see immidiately based on the LED color if the system is in day/night mode. I think i will create 2 PSK's. One for day mode, one for night mode. Then I let the IPP...
You can use the Cisco SPA Provisioning Guide: https://supportforums.cisco.com/docs/DOC-9894Please test it first in a controlled environment before applying it to all phones. Maybe some functionality is broken (like LDAP address book in 7.5.4)regards
I have this problem too.Wireshark trace just shows a TCP handshake and then nothing. Phone freezes an needs to be rebooted by powering it off.I'll try the 7.5.2 firmware. Too bad such things aren't tested by Cisco when releasing new firmware.
Hi Paul,You're right about that. What I said in the reply to JosephDoherty I'm going to shape the outbound traffic and see if that will helpthank you for your reply!regards,Erik