Hi, I upgraded SX20 From TC 7.3 to CE 9.13. After upgrading, System show invalid release Key and i requested release Key from Licensing portal. In Lic portal, i can only choose CE 9.0.1 and there is not option to choose 9.13.
Hi,
I have CUCM 10.5 on HQ and SRST mode router in branch. For all branch PSTN call, I would like to pass PSTN call via SRST router (Not passing HQ). How to deploy on SRST router ?
Hi,
One of our project, we use touch 10 device with cisco SX20. But, after we shut down all devices, Touch 10 can't automatically reconnect to Cisco SX20. How can we solve to reconnect itself ?
Hi All Experts,
Anyone can advice to me. I would like to use the attached logical design. Actually, i want to discuss cisco best practice design for redundancy, WAN and LAN access as attached design.
WAN portion
- will run eBGP with ISP and iBGP be...
Thanks, BTW, If we use router as CME SRST on branch, Do we need to configure ephone dn, ephone, etc.. on Branch SRST router ? or If we done call-manager fallback command, every ephone dn is automatically sync from HQ CUCM to SRST router ? Let's say,...
To register branch FTD to HQ FMC, Do we need to assign public ip on management interface ? I think if we have VPN/MPLS link to HQ, we can register. RIGHT ?
Thanks, As cisco TAC Case, C22 M3 doesn't support ESXi with RAID config because our server doesn't have Raid Card. So, i try to install ESXi without RAID. BTW, please help to guide how to change Hard Drives to JBOD mode ?