About b.bielewicz

b.bielewicz · 06-29-2018

Hi, I've been trieng to establish what version of FUS is on the 2504 WLC for some time. I thnk it is the 1.6 version installed, but cant really confirm this. As there is no release notes available for this version any more. I'm prepering to upgrade...

b.bielewicz · 08-03-2015

Hi, we have an issue whereby the coverage provided by the 1600 AP is much poorer than when the site was surveyed using a standalone access point. As part of testing I have manually changed the power assignments to all be set to maximum rather than us...

b.bielewicz · 04-11-2014

Hi,I wonder why is maximum transmit power on 2.4ghz limited only 13 dBm?? I checked 1200 and 2600 series access points and the max is 17 dBm.https://drive.google.com/folderview?id=0B5oGD8CI0B7kMFlKN2pwc0NLWjQ&usp=sharing BB

b.bielewicz · 07-02-2018

thanks for the help on this

b.bielewicz · 07-02-2018

Hi Scott,Uptime is quite good on this controller. But need to get 1852 on this controller, hence upgrade to newer version of firmware. So, I can just go for FUS 1.9 with no issue or I need to go for 1.7 then 1.8 and then 1.9?RegardsBart

b.bielewicz · 08-04-2015

Just to add, I checked the settings on a seperate deployment we have that is running a 7.3 code version. All power levels are available with maximum being set at 17dbm. I think my only option is to downgrade/upgrade at this point

b.bielewicz · 08-04-2015

Hi, disabling DTPC made no difference at all. It doesn't even look like the AP's picked the setting up: Num Of Supported Power Levels ............. 3 Tx Power Level 1 .......................... 13 dBm Tx Power Level 2 ......................

Member Since	‎04-11-2014 07:24 AM
Date Last Visited	‎07-11-2018 12:38 AM
Posts	9

User Statistics

User Activity

WLC 2504 FUS what version is installed? 1.6.0.0 ? will i need to upgrade it if...

Low TX Power WLC 5508 v7.4.110.0 With Cisco 1602

Standalone Cisco 1602 E max transmits power 13dBm only?

Re: WLC 2504 FUS what version is installed? 1.6.0.0 ? will i need to upgrade it if...

Re: WLC 2504 FUS what version is installed? 1.6.0.0 ? will i need to upgrade it if...

Just to add, I checked the

Hi, disabling DTPC made no