I am trying to figure out what is the difference between those 3 SKUs :NCS-5011-32F , NCS-5011-32H and NCS-5011 . The Data Sheets tells me that NCS-5011 has 32 ports that support either 10GE/25GE/40GE/50GE/100GE, but I really cant figure out what the...

Hi I am planning an upgrade from ASR1002 IOS 3.16 to RP3 16.5 ASR1006-X Chassis and ESP-100. I didn't find tho if the LNS/LAC PPPoE configurations are supported . I did find an article about configuring it on the asr1k - > https://www.cisco.com/c/en/...

I have the following hardware : SX20 Codec with firmware TC7.3.6.ea51021. The codec is connected to a CTS-PHD1080P12XS2 camera with a CAB-PHD4XS2-SPLIT cable. I have a TRC5 remote, which has to be compatible with the TC software The problem however i...

I've upgraded 2 of our ASR1000-RP2 ( they are in ASR1004s ) to 16.9.4 IOS XE. The previous version was : 3.13 ( 154-3 ) . Since the upgrade the ASR1000-SIP10 doesn't get recognized . It detects that something is in slot 0  *Oct 28 16:34:33.512: %IOSX...

Hi, We've got a used Cisco Codec SX80 ( TTC6-12 ). The device seems pretty unresponsive when connected to a monitor and also the uplink doesn't get up. On the console port however there is some ouput :(0,0) Tilera Hypervisor, version 4.3.3.184581 (so...