About jamesalambertctr

jamesalambertctr · 10-06-2014

I am trying to use a workstation with Wireshark on it to capture the traffic to/from another workstation on the network. The goal is to view all traffic that takes place to this one machine during network imaging.So I set up the SPAN session on the ...

jamesalambertctr · 10-06-2014

Okay. I will default the port next time around, set just the 'switchport' and 'no shut' commands for the destination port.I will also begin reading up on the Intel NIC from the posted link. Hopefully we are allowed to make those changes.Thank you b...

jamesalambertctr · 10-06-2014

Certainly,Both ports were configured the same. When I set up the session, I also checked the 'show int status' output and fastEthernet 1/0/1 was in 'MONITOR' status. interface fastEthernet1/0/1 - 2 switchport mode access switchport access vlan 65 ...

Member Since	‎05-28-2014 03:38 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	5

User Statistics

User Activity

Wireshark not capturing traffic from SPAN port

Okay. I will default the

Certainly,Both ports were