HI. Got a SF500 in layer3 mode, operating 5 vlans all with their own subnet.Vlan 10 = 192.168.10.0/24Vlan 100 = 192.168.100.0/24Vlan 200 = 192.168.200.0/24Vlan 201 = 192.168.201.0/24Vlan 202 = 192.168.202.0/24 We have a gateway on Vlan 10 (192.168.10...

Hi fellow forumers! I have a SF500 (layer 3 mode) with 2 vlans.  Intervlan routing is fine - all working.Vlan1 has a network 192.168.0.0/24, and vlan2 is 192.168.100.0/24The internet connection is on a router with the ip 192.168.0.1 (vlan 1).If I pin...

Hi. I have a SF500 in layer 3 mode. I have 5 vlans (10,100,200,201,202)Of these 5 vlans, each one has a vlan interface configured.However, vlan 10 and 202 don't have an IPv4 route (which is created automatically I believe). I had a look and the vlan ...

Hi.Im setting up a network with a vlan config  - one 'inside' and one 'outside' clan. Both vlans should not be able to talk to each other, but they should both be able to contact the default gateway and DHCP server. Therefore we have 2 vlans and 1 ac...