Hello, guysi've created a lab with 5 routers all running IOS 15.2 ┌ ------- R3-----┐ R1 R4 ---- R5 └--------R2-----┘ R1 has a two routes to R5:through R2 is weight 10through R3 is weight 20i configured ip sla path-echo opera...
Hello community!I'm trying to test an IPv6 config at my CUCM 8.6.2 cluster.I configured a link-local address on the CUCM.But when i go to Media Resources -> Media Termination Point and open the information i see this picture:RegistrationRegistered wi...
ip route 172.16.50.0 255.255.255.0 172.16.10.2 10 150 - this gives me an errorafter the "next hop" input i may input the route "distance"---i dont want to set the source-ip for the ip sla operation.i want it to switch routes whr the primary interface...
As this is a lab environment i will attach the configs themeselves R1:interface FastEthernet2/0 ip address 172.16.10.1 255.255.255.0 duplex half!interface FastEthernet3/0 ip address 172.16.20.1 255.255.255.0 duplex half!ip route 172.16.30.0 255.255.2...
I have read this thread, but still don't understand how to make the phone to be partialy registered.We need it to test the correct appearance of the phone status in our project.
