When I try to do a config revert of a Cisco 4451 code 16.03.5 an message comes up.  I was wondering if anyone know what it is?   config t revert timer 10 %No Rollback Confirmed Change pending   I enabled archive path flash:  should I do archive path ...

Would you guys just run static routes or a routing protocol?  Just curious what is best practices.

I was just curious why there is no Backup channel on some traffic class and backup channel on others.  Exchange Application: Dst-Site-Prefix: 192.168.0.0/6 Application: exchange DSCP: default [0] Traffic class id:48670 app_id:218103857 Clock Time: ...

What's wrong with my Qos policy it's dropping packets class-map match-any Video match access-group name Video!policy-map Video class Video priority percent 20 64000000 class class-default bandwidth percent 80policy-map 100MegShape class class-defau...

%SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no longer detected interface GigabitEthernet4/5 switchport access vlan 100 switchport mode access switchport nonegotiate switchport voice vlan 290 no logging event link-status no snmp trap link-status ...