Now I downloaded the image from another different source. Look Like I am getting different error as like below.
ciscoasa(config-webvpn)# anyconnect image disk0:/anyconnect-win-3.1.03103-k9.p$ Failed to unzip the Anyconenct Package ciscoasa(config-webvpn)#
Also attached the RAM settings for ASA in GNS3.
... View more
I heard that there is a 90 day evaluation copy of FTD you can get from Cisco. But look like when I tried to access Demo License Section with my Cisco ID it is giving some error related to my id is not associated with required service contract something like that.
So question is , Is evaluation copy is available to Public or still that needs some sort of permission ?
2nd is if Evaluation Copy is not avaialble to Public then buying Hardware Firewall like ( i.e Cisco ASA 5512 ) will help me to get into FirePower world ?
3rd is is there any way I can buy service contract only designated for downloading IOS Software ?
... View more
I was doing a Port Forwarding LAB in my GNS3. Inside source machine ( 10.0.0.25 ) is listening on 8000 port as Web Server. From the Outside say for example in my LAB user will be hitting from 192.168.137.XX Block and when it will be hitting the NATTED IP ( 192.168.137.230 ) of local Web Server with 8001 port eventually it will do a Port Forwarding to 8000 on which port basically Local Web Server is Listening.
Here look like everything is working. From Outside, Web Server is Opening. I attached a screenshot. Also doing a packet trace that is also showing everything is Allowed.
But I dont see any translate counter in at "sh nat "( translate_hits = 0,) output.
( Local 10.0.0.25: 8000 Public 192.168.137.230 :8001 ).
Also dont see any output when I give command like
"sh conn address 10.0.0.25 or 192.168.137.230.
Please advise what could be the Problem.
Here I attached my diagram, sh run of ASA , Test Server Screenshot and Other OutPut
ASAFW# sh run : Saved : ASA Version 8.4(2) ! hostname ASAFW enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted names ! interface GigabitEthernet0 nameif inside security-level 100 ip address 10.1.0.250 255.255.255.0 ! interface GigabitEthernet1 nameif outside security-level 0 ip address 192.168.137.250 255.255.255.0 ! interface GigabitEthernet2 shutdown no nameif no security-level no ip address ! interface GigabitEthernet3 shutdown no nameif no security-level no ip address ! ftp mode passive object network obj_10.0.0.25 host 10.0.0.25 access-list outside_access_in extended permit tcp any object obj_10.0.0.25 pager lines 24 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 ! object network obj_10.0.0.25 nat (inside,outside) static 192.168.137.230 service tcp 8000 8001 access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.137.1 1 route inside 10.0.0.0 255.0.0.0 10.1.0.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart telnet timeout 5 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ! ! prompt hostname context no call-home reporting anonymous call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email firstname.lastname@example.org destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily crashinfo save disable Cryptochecksum:b999f51dd7ecb5f1d072f4e82e257d62 : end
Cisco Adaptive Security Appliance Software Version 8.4(2)
ASAFW# sh nat
Auto NAT Policies (Section 2) 1 (inside) to (outside) source static obj_10.0.0.25 192.168.137.230 service tcp 8000 8001 translate_hits = 0, untranslate_hits = 4
ASAFW# sh xlate
1 in use, 1 most used Flags: D - DNS, i - dynamic, r - portmap, s - static, I - identity, T - twice TCP PAT from inside:10.0.0.25 8000-8000 to outside:192.168.137.230 8001-8001 flags sr idle 0:00:18 timeout 0:00:00
ASAFW# sh conn address 10.0.0.25 0 in use, 3 most used
ASAFW# sh conn address 192.168.137.230 0 in use, 3 most used ASAFW#
ASAFW# packet-tracer input outside tcp 192.168.137.239 8001 192.168.137.230 8000
Phase: 1 Type: UN-NAT Subtype: static Result: ALLOW Config: object network obj_10.0.0.25 nat (inside,outside) static 192.168.137.230 service tcp 8000 8001 Additional Information: NAT divert to egress interface inside Untranslate 192.168.137.230/8001 to 10.0.0.25/8000
Phase: 2 Type: ACCESS-LIST Subtype: log Result: ALLOW Config: access-group outside_access_in in interface outside access-list outside_access_in extended permit tcp any object obj_10.0.0.25 Additional Information:
Phase: 3 Type: IP-OPTIONS Subtype: Result: ALLOW Config: Additional Information:
Phase: 4 Type: NAT Subtype: rpf-check Result: ALLOW Config: object network obj_10.0.0.25 nat (inside,outside) static 192.168.137.230 service tcp 8000 8001 Additional Information:
Phase: 5 Type: IP-OPTIONS Subtype: Result: ALLOW Config: Additional Information:
Phase: 6 Type: FLOW-CREATION Subtype: Result: ALLOW Config: Additional Information: New flow created with id 44, packet dispatched to next module
Result: input-interface: outside input-status: up input-line-status: up output-interface: inside output-status: up output-line-status: up Action: allow
... View more
Quick Question Jennifer Halim , is this a definite requirement to have AnyConnect Essentials enabled to configure SSL Client Less or with Client VPN ? I mean what is the purpose of AnyConnect Essentials license ?
... View more
Hi All Need help. While I was installing anyconnect image i am getting below error in my lab with IOS Version : ASA 8.4 (2) in GNS3 ciscoasa(config-webvpn)# anyconnect image disk0:/anyconnect-win-3.1.03103-k9.p$ ERROR: Not a valid Anyconnect image - invalid comment (NULL) What could be the issue ? BR//Subrun
... View more
Dear All We have One Server which is under FWSM. We can ftp to remote network from that server through command mode. But not able to connect to remote network using a client software. At my FWSM FWSM passive Mode is enabled. Please help.
... View more