About liteultom

liteultom · 10-20-2015

Hello all ! Here I come again asking for help ! :) Here is the goal : I want one set of computers to use one WAN and an other set using the other WAN, based on the IP Range. I use a cisco 891 router. Fastethernet0 is one WAN, GigabitEthernet8 is th...

liteultom · 10-15-2015

Hello all ! I am )very new to all this and I have to configure a cisco 891 router. So far I was doing ok but I have a problem connecting devices on vlan 2. I don't want to assign vlan depending on the port, the devices are able to tag their own pac...

liteultom · 10-06-2015

Hello, I edited this post because my question have changed a lot.Question (theorical question)Let's say I have two vlans. On each port of my switch, I have two devices. Device 1 is on vlan 10 and device 2 is on vlan 20.Device 1 is able to emit tagged...

liteultom · 10-21-2015

it works ! thanks a lot :D (conf file under) The following conf file make things work that way : I have two internet access (gateway 192.168.0.254 and 192.168.1.254).Each internet access box is plugged on one WAN (192.168.0.254 on gigabitEthernet 8...

liteultom · 10-21-2015

damn, I did not think to apply Policy to the vlan ! I have something working now but I like your solution better, I will try it this afternoon ! thanks !

liteultom · 10-20-2015

thanks ! :)

liteultom · 10-08-2015

Thank you for your answer.My internet WAN has a very small bandwidth (4Mb/s) + a second one at ~20Mb/s .The main traffic is local traffic, generated by our work application, central server with ~30 users connected to it all day long. Total number of ...

liteultom · 10-08-2015

Hello, your answer did help a bit, and since my post I had a lot of new pieces of information, including the fact that the phones we will be using are able to tag their own packets so it simplifies a lot of things, no need to use mac-based vlan !My p...

Member Since	‎11-20-2014 05:51 AM
Date Last Visited	‎08-18-2017 04:02 AM
Posts	10

User Statistics

User Activity

Range of ip address on different WANs, source ip routing ? [cisco 891]

891 Router - No ip address on vlan 2

(New question) mac-based vlans paquet diffusion

it works ! thanks a lot :D

damn, I did not think to

thanks ! :)

Thank you for your answer.My

Hello, your answer did help a