Hello, we have an ASA 5545X as our internet edge firewall.  On this we are doing wccp redirect for http traffic that goes to our inside interface where we have an Ironport S380. Normal internet traffic that comes into the inside interface egressing t...

 Hello, we are using an older version of Cisco ACS version 4.2.  I am looking to see if we can enable certain groups to do only certain commands.  We are using the web interface for this.  All show commands are ok but we would also like to have them ...

ASA 5520 8.2 codeInside Interface;  10.60.53.1/24DMZ Interface:  172.16.125.1/24Public Mail Server:  1.1.1.1I have traffic coming from a 10.60.48.0 network across the WAN that hits the firewall inside interface and would normally go out to the intern...

Hello, I have two ASA's doing a site to site tunnel, one with 8.2 code and one with 8.4.  I don't have the config handy but I believe I know where the issue is.  On the ASA with 8.2 code we have 3 networks inside.  I believe that is ok. On the 8.4 AS...

Hello, I am in the process of moving remote access VPN's from one data center to another.  The public IP address is different in the other data center.  I am moving from one Cisco ASA to another Cisco ASA so devices are the same.  The types of RA VPN...