I'm trying to install RADKit on a newly deployed Ubuntu 22.04.4 LTS server, but get this error:
$ bash cisco_radkit_1.6.4_linux_x86_64.sh
cisco_radkit_1.6.4_linux_x86_64.sh: line 1: syntax error near unexpected token `newline'
cisco_radkit_1.6.4_l...
Hi,
I have a bunch of ISR4321s running 3.16.2S. I recently upgraded a few of them to Everest (16.6.2) which has resulted in connected interfaces not getting redistributed into BGP when using a route-map with match interface like this:
route-map c...
Hi,
I know how to get values for IOS version and ROMMON version, but CPLD version on the other hand I can't see how you can collect via SNMP.
Any suggestions?
Thanks.
/JZ
Hi,
I'm doing BFD for BGP on an ASR9001. It has been agreed with the SP that we run with 500ms interval and a multiplier of 3. This is what I have configured:
router bgp 65001
neighbor 192.168.1.23
remote-as 8220
bfd fast-detect
bfd multipl...
Hi,
I'm trying to find out how to use PBR in conjunction with static NAT. I'm able to make it work with Dynamic PAT, but not static NAT...
Trouble
6 Oct 05 2016 08:47:42 110003 195.41.2.20 80 2.2.2.2 28641 Routing failed to locate next hop for TCP ...
Hi, Did you not wait the 90 seconds they say you must in the upgrade guide? https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/upgrade/b_cisco_dna_center_upgrade_guide/b_cisco_dna_center_upgrad...
Great post. I'm using a 3650 a PnP device that is connected to a 9300 that has an etherchannel + NV1 (pnp startup-vlan) configured. I'm reusing the DHCP option 43 from other pools where I have on the same 9300 that are working.The 3650 gets an IP add...
Hi,
I'm looking into this:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2-Remote-Access.html#anc6
But no "luck" getting it to work.
