About tapeterson

tapeterson · 02-11-2013

We have a location that has a 2621 router for inbound analog DID's running H323. The second router 2651XM with FXO's running MGCP for outbound calls. Can I upgrade that location with one 2811 and use MGCP for both inbound DID's and out bound FXO? Our...

tapeterson · 06-12-2012

Trying to Create a HW conference bridge with 4 sessions and up to 32 particapents per conference. Call Manager version 7.1.2Created a hardware conference bridge on Cisco 2811. The problem is, that when I add this DSP farm to the media resource gr...

tapeterson · 03-12-2010

I am trying to access the Cisco Personal Communications Assistant. I can get to the web page. I type in user name, password and domain name. I get “access denied”. After 3 or 4 times it will disable my account. I can go into Unity Admin and re-enable...

tapeterson · 03-10-2010

I was wonder if there is a way for the end user to change the conversation speed on the phone. I have been getting some calls since the upgrade to 7 that the conversation speed (not the message playback speed) too fast or slow. I have been going to t...

tapeterson · 10-08-2008

Looking to upgrade our Call Manager to 6.0 next year. We have a couple of locatons that are running 2651XM routers.Wondering if there is anybody running 6.0 with 2651XM's.The only gateways for these routers would be for 911 and Fax machines. The inco...

tapeterson · 06-12-2012

Hi Alex,The IP address for 0/0.16 is on our voice subnet. The conference bridge is registered with the CM.

tapeterson · 03-10-2010

Thanks for the replys. I did read where 4 is to decrese and 6 to increse. The problem is I can not find the window of oppertunity to increaes and decrease when the "Cisco Lady" is talking. It works fine (increase and decrease) when I am listening to ...

tapeterson · 09-17-2008

I would have to change the IP domain name to "Testville_rt1.Testville.mnb"Tried it and it works fine.

tapeterson · 09-17-2008

After typing this message, I noticed that all would have to do is change the domain name to Testville.mnb in the CM. I am going to try this on the test router.Sorry for the stupid question

tapeterson · 09-15-2008

Thanks for the fast response.

Member Since	‎10-16-2006 11:45 AM
Date Last Visited	‎12-13-2021 01:58 PM
Posts	14

User Statistics

User Activity

VIC 2DID card with 2811 and MGCP

Conference Bridge no Voice

Accessing Cisco Personal Communications Assistant for the First Time Cisco Unity 7.0(2).

Changing Conversation Speed on Cisco Phones Cisco. Unity 7.0 Build 7.0(2)

Unifiedcommunications 6.0 and 2651XM routers

Conference Bridge no Voice

Re: Changing Conversation Speed on Cisco Phones Cisco. Unity 7.0

Re: Adding SSH to Cisco Routers in a Network with Call Manger 4.

Re: Adding SSH to Cisco Routers in a Network with Call Manger 4.

Re: Getting CNA to Work on 4507 Switch