About elieibr01

elieibr01 · 11-26-2014

Hello All,I've configured RSTP in one of our branch divisions because we decided to add a backup wireless bridge in case one of our fibers gets cut out. Everything is working great , i am getting the desired result, however, i wanted to also syslog t...

elieibr01 · 03-26-2014

Hi all,I have been tasked to find a solution to a problem we have in one of the sites we just bought.Here is the scenario:We have a C class network over there, for the sake of this conversation, it will be 192.168.1.0/24. The network only has L3 swit...

elieibr01 · 09-17-2013

Hello All I currently am trying to do some QoS on our network, and came to realize that the MQC on the 3560's V2 only allows to match 3 criterias in class-maps ( Access group, input interface and ip).I've been following some training for certificatio...

elieibr01 · 07-05-2013

Hi EveryoneI currently setup a remote site with a ASA5505, their outside int gets their ip dynamically. The site to site vpn works, however to have it in a cleaner setup, i would like to have the tunnel come up regardless of whatever dynamic ip my re...

elieibr01 · 11-26-2014

Tried after applying the below command still no luck Will keep looking

elieibr01 · 11-26-2014

I think i may have found the issue, however i cannot test in prod right now. snmp-server enable traps bridge topologychange should do the trick! I have enabled it,. and report back once i am able to test it

elieibr01 · 11-26-2014

Here is the IOS i am using on the catalyst s222-ipservices_wan-mz.122-18.SXF14.bin Also here is all the logging settings for this Catalyst SNFCORE6509#sh running-config | i logginglogging event link-status defaultlogging history informationallogging...

elieibr01 · 11-26-2014

I have the same exact setup on my lab network, my switches are syslogging to the same server, and i do get the trap message whenever the topology changes there. The only difference is im using a 3560 on my lab , and the prod is a 6509. The weird thi...

elieibr01 · 11-26-2014

Hi Sarbjit-2014 Thank you for your response, i dont get any traps msg's at all, doing a sh log on the catalyst will not show me those events. Below is the output of my sh log ,for obvious reasons i have masked the logging hostSyslog logging: enabled...

Member Since	‎07-05-2013 08:44 AM
Date Last Visited	‎04-17-2024 12:04 AM
Posts	13

User Statistics

User Activity

Spanning Tree Topology Changes notifications

Can i have two different vlans with a class C network?

C3560 v2 24PS QoS features

Site to Site vpn with 1 Static ip and 1 dynamically assigned

Tried after applying the

I think i may have found the

Here is the IOS i am using on

I have the same exact setup

Hi Sarbjit-2014 Thank you