We have an unusual issue. We are using CUCM 10.5. We have 3 SX20s registered to CUCM, a C40, an SX10. All 5 of these devices are registered as Telepresence end points We have an additional SX20 that is registered as a SIP endpoint, not a telepres...
C2911 running 15.4(3)M6a
Router has a DMVPN connection to a hub and NAT overload (PAT) using a route-map. Problem is that certain packets are showing in the log as being denied by the ACL used by the route-map. Traffic over the DMVPN and general I...
is it possible to have EEM read from a file on an scp server, then load each line of that file into an acl? Basically I want eem to update an acl periodically. I know I can use eem to remove the acl from the interface and add the static parts of th...
We currently are using LDAP to authenticate users accessing an ASA. We enforce usage of the AnyConnect client by mapping the msNPAllowDialIn LDAP attribute to the Cisco Tunneling-Protocols attribute. "Deny Access" in the A/D Dial-In tab of the user...
In my experience, on a router acting as an H.323 gateway and using T.38, you need to have the following command in the config.ip tcp path-mtu-discoveryDoesn't hurt to try.
Whether or not you need the aim card is largely a matter of the bandwidth you need to support and the number of users. For 5 simultaneous users at anything more than a few megabits I would definitely add the card. as for the version, I believe you n...