About pierrebirenbaum

pierrebirenbaum · 09-20-2013

Hi,I had a simple setup using 2 RV320.RV320 tunnel config at Site A:Local subnet = 10.11.2.0/24Remote subnet = 10.31.0.0/24RV320 tunnel config at Site B:Local subnet= 10.31.0.0/24Remote subnet = 10.11.2.0/24So far so good! Tunnel is established, and ...

pierrebirenbaum · 09-26-2013

Hi Nagaraja,No, I cannot do that. Because now the status seems to remain stable ("Connected"), however our root issue is still there.RV320 does not answer to Extreme router (ping or arp), whereas it works fine with a PC connected to RV320, or when Ca...

pierrebirenbaum · 09-26-2013

Hi,Is their any plan from Cisco support to permanently fix that problem?My "version" of the issue after many tests:- RV320 WAN1 port connected to an Extreme summit layer3 switch, other port WAN2 not used (we also tried vice versa and same result by t...

pierrebirenbaum · 09-24-2013

Hi Luis,Thanks for your answer.I attach the config (we are in testing phase now, so no public IP are used anyway.).I have now updated the firmware to the version you provided. The result is the same:When I try to create a new VPN tunnel 2 in site A w...

Member Since	‎08-13-2013 04:03 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	4

User Statistics

User Activity

RV320: Cannot access several subnet through VPN

New RV320 "Connected (Inactive)" Need some help/advice!

New RV320 "Connected (Inactive)" Need some help/advice!

RV320: Cannot access several subnet through VPN