About danbr2233

danbr2233 · 08-16-2017

Hello all, wonder if someone can help. We have two L3 switches connected to two routers that the ISP control, this is setup with HSRP. Now there are additional ranges that are added, do these need to be setup with HSRP as well? On just the switches,...

danbr2233 · 08-26-2013

We have a 3750 switch, and a 1gigabit uplink, we want to stop devices connected to this switch saturating all the uplink, and therefore want to have some sort of policy where we can limit servers to says 600mbps and burst up to 800mbps, making sure t...

danbr2233 · 08-16-2017

If you see my response below it's for the IP ranges in vlan100, there not new but wasn't aware that HSRP needed to be setup for these as well, so they have never worked if that's the case.

danbr2233 · 08-16-2017

Not sure if you saw the attachment, but both ranges route from the ISP routers. We had some power work completed where the primary switch went down for a brief period, and at this time 185.1.1.1 was not pinging from the outside, so I'm just trying to...

danbr2233 · 08-31-2013

Ok so I have tried using srr-queue bandwidth limit which does the trick for outgoing, but not incoming.So I tried using a rate limit option but if I am understanding this correctly the 3750 has a limit to the size of this, and to achvieve what I want...

danbr2233 · 08-27-2013

I was hoping that someone could provide specifics maybe even commands to assist. I have read plenty of documentation, I'm still not sure the best way to do this.

Member Since	‎08-26-2013 07:09 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	6

User Statistics

User Activity

HSRP setup

QoS for port speed

If you see my response below

Not sure if you saw the

Re: QoS for port speed

QoS for port speed