Hello All, I am facing issue in Cisco ISE for Wired Users and would like to get your help. Below are the details 1. We are using ISE version 2.7. 2. Two different series of Cisco Switches 2960x and 9200 3. No issue faced by users who are connected on...
Hi,
For one of our customers, we are trying to use Paging Application (Informacast) over WAN to multiple sites, which requires Multicasting to be enabled over the WAN links and LAN links.
We have enabled ip multicast-routing & pim sparse-dense-mode...
Hi Cisco Certification Support Team,
Our company "Systems Networks Company Ltd" has completed four specializations,
1) Advanced Collaboration Architecture
2) Advanced Data Center Architecture
3) Advanced Security Architecture
4) Advanced Enterpr...
Hello All,i have a network setup operational, have one Cisco Core Switch (4506-E) with SUP 7 engine (WS-X45-SUP7-E). Three modules are 48 Port 1G SFP Ports (WS-X4448-GB-SFP). Have 130+ access switches (cisco 2960). All the access switches are connect...
Hi @Marcelo Morais I checked the Authentication and Accounting Servers, both are same PSN Nodes. I opened TAC case and the engineer requested for the DART Bundle when the end device has hit the "Unknown Authorization Policy" and not moved to "Compli...
Regarding DHCP SnoopingYes i applied ip dhcp snooping commands that were given in ISE configuration evaluator (3 to 4 commands) and after this the user has got network access. Before DHCP snooping was applied on switch, user will not have any network...
Hi This is what i did now for testing On switch shut/no-shut on user interfaceUser status on computer shows compliant and network access allowedOn switch show authentication session interface gig x/x detail, it shows REDIRECT-ACL applied and URL re...
Hi @Marcelo Morais Thank you for your response! Users on 2960x are hitting the same authentication and authorization policies that users on 9200 series switches are hitting. Posture status will be compliant. Today i fixed one of the issues faced, i ...
Hi John,
thanks for your reply, yes multicast is enabled on the Firewall on all interfaces, IGMP and PIM enabled.
Access Rules created on the Firewall on both Inside and Outside Interfaces (in ACL).
Access Rules have
any any ip
any any igmp
any a...
