alright so I am falling on to this network and I have never messed with a NX-OS switch the are VCP peered, now my question is do es one switch only need the int vlan or both switches need to have the int vlan of all the vlans, this is weird to me for...
I have 2 sources that we get out multicast feed from, they are not the same feeds they both provide different videos and they come from a different source but when I have both interfaces on for both sources of multicast feeds the videos bleed into ea...
I have ssh configured on my switch I have created the rsa keys, ip ssh v 2, ip ssh authenticate-retries 3, Ip ssh time-outs 60.
line vty 0 15
login local
transport output all
transport input all
the issue I am having is when I try to ssh into it ...
I am trying to figure out the best way to implement QoS with our current Network, I just found out about Adaptive QoS and I was wondering do you really need IPsec on your DMVPN tunnel for this to work or is there another way around this
we are currently using DMVPN, we have applied QoS attributes to the hub and spokes everything I have read about DMVPN QoS explains the QoS being applied to the hub and the spokes being added to a NHRP group. what my question is can you apply this on ...
they are using two different devices and two completely different ip schemes for security reasons I cant give them out, but they are not even close to being in the same subnet. you can view them both in the same gui interface the problem could be the...
I am using telnet to connect, I have an update on the situation, basically there are three switches in a triangle topolpgy if that makes since there is no connection between the bottom two switches they both connect to the top one and that's it, I ca...
You don't really need the Switchport voice vlan on that port that the printer is on
config t
int 3/0/29
switchport mode access
switchport access vlan 8
spanning-tree portfast