About Skawilly1

Skawilly1 · 09-13-2018

I have an ASA 5512 with 9.2 as its image. I am wondering, even from just interface to interface, are these NAT'd? I have my Inside interface LAN of 172.16.0.0/16 on port 1, Security Level of 100 and my DMZ interface LAN 10.10.10.0 /24 on port 2, ...

Skawilly1 · 08-22-2018

I have searched the forums and all the answers I have seen I have implemented. When I ping into the ASA's outside (WAN) interface, I can see on the log it is getting denied. I have added an ACL for coming in to the outside interface to allow ICMP....

Skawilly1 · 07-10-2018

I have an ASA 5508-X and my bank offers a complimentary service to scan my network for PCI compliance. Everything has been good for a couple of years now. But last month it failed. I checked the results and my IPSec and SSH ciphers were failing. I up...

Skawilly1 · 04-29-2018

Hello. I have a weird issue. I am attempting to RDP from my mobile device to my computer, however my ISP has blocked very many ports. 443, however, is open. VPN is not an option, even for SSL at the moment. I can see traffic hitting the firewall usin...

Skawilly1 · 10-03-2017

Ok here it is. I made some changes to a switch, while at the Colo. After I left, I went to my home office and attempted to SSH in and I am getting an auth error, which is new and I am not sure why. For some reason, using those same creds that give me...

Skawilly1 · 07-11-2018

I appreciate that info. By this then, there is no way to get the 5508-X firewall to be PCI compliant and I really dont believe that is the case. I will need to work with the PCI scanning vendor and figure out if I am not reading it correctly or if th...

Skawilly1 · 07-10-2018

Thanks for the reply. I am not seeing those commands or any items close to it. I believe you are working on an older ASA or a router.

Skawilly1 · 04-30-2018

Dynamic at the end. Beautiful work sir.

Skawilly1 · 04-30-2018

You fixed my issue in like 2 minutes. This is great news. I have 3 questions for you before I mark it as resolved. 1) My device is not currently supported/no support account. Is there a way I can still update the 'interim'? 2) What caught your ...

Skawilly1 · 10-04-2017

I dont have access to the CLI. - Basically, if I save a telnet password in the Device Manager's Web UI, will that Undo anything in my running config, or simply add to the running config? Because I have unchanged settings I need to write mem to.

Member Since	‎09-21-2017 10:39 PM
Date Last Visited	‎09-20-2018 08:39 PM
Posts	11

User Statistics

User Activity

ASA Interface to Interface

Cannot Ping into an ASA 5506

ASA SSH Keys Failing PCI scan

ASA 443 Port Forwarding Issues

Running Config and the Device Manager | 2960-CX

Re: ASA SSH Keys Failing PCI scan

Re: ASA SSH Keys Failing PCI scan

Re: ASA 443 Port Forwarding Issues

Re: ASA 443 Port Forwarding Issues

Re: Running Config and the Device Manager | 2960-CX