About ahmede1

ahmede1 · 07-13-2020

Good day, We have ASA cluster, routing is symmetrical, so whatever traffic leaves through the master F/W it returns through the same firewall, same with the slave.. According to my limited understanding to how cluster works (I'm network guy not a sec...

ahmede1 · 07-09-2020

I need to do a packet capture on the CCL traffic to find out the source/destination of the packets that still using the CCL links.Does the ASA encrypt all CCL traffic? If I SPAN the CCL link (connected to a Nexus Switch) and connect a laptop running ...

ahmede1 · 12-09-2019

Quick Question please, In MPLS network with VRFs, there are two labels on the packet, one is the MP-BGP label and the other is LDP label. Does the MP-BGP label have EXP bit? Or it's only on the LDP label? Thank you

ahmede1 · 08-23-2019

We have MPLS backbone, the backbone is connected to two internet service providers (ISP1 and ISP2), PE1 receives the default route from ISP1 and PE2 receives the default route from ISP2. Both PEs then advertise the default route to other VRFs (Custom...

ahmede1 · 07-16-2018

We have Cisco ASR1002-HX with two power supplies, we are doing acceptance testing, one of the tests is to fail one of the power supplies to make sure that the router will work fine with one power supply without losing any packets.. Is there a way to ...

ahmede1 · 10-02-2018

Is this feature out yet on XR?

ahmede1 · 11-20-2017

Thank you.. We did try that, but it doesn't work.. Once we add ISIS only, ISIS stops working, we also see no hits on the access list access-list ISIS_ACL ethertype permit isis (hitcount=0) access-list ISIS_ACL ethertype permit any (hitcount=27520...

Member Since	‎09-29-2017 09:11 AM
Date Last Visited	‎07-20-2020 06:24 AM
Posts	12

User Statistics

User Activity

ASA cluster

CCL Encryption

EXP bit

RT import/export question

Cisco ASR1002-HX power supply

Re: hi david,

Re: ASA and ISIS