About emta

emta · 02-25-2004

I'm preparing to convert two pair of 6506s from native IOS version 12.1(8a)E5 with redundant L2 and static routes to hybrid code. Is there converting tool available for this? I need best practice recommendations to minimize problems as these are the ...

emta · 02-27-2004

You can not configure Etherchannel spread across two switches. Etherchannel capability is within the same switch to increase the port bandwidth. For instance, if 100Meg full duplex (= 200Meg) is not enough to support traffic for the server connectivi...

emta · 02-25-2004

Thanks for the information. As to the reason behind this has to do with L8 and above of the OSI... politics of the company. Something that you and I do NOT care to be involved with!!! But I will try your instructor to see if he could help. Thank you.

emta · 02-25-2004

If you have the exact error message, you can use the Cisco "output interpreter" tool which could be very helpful (but the error message must be EXACT). The URL for the output interpreter is: https://www.cisco.com/cgi-bin/Support/OutputInterpreter/hom...

emta · 02-25-2004

If you have the MAC address, you can issue this command on the switch:"sh cam xx-xx-xx-xx-xx-xx"Where xx-xx-xx-xx-xx-xx is your mac address. If the device is on this switch, the port associated with the MAC address will be the output. If the port sho...

emta · 02-25-2004

It depends on which PFC card your 6500 has. If you have PFC 1 or 3, you can have up to 256 HSRP group ID which means that this card will support up to 256 well-known MAC addresses. Otherwise, with PFC2, it will only support 16 unique HSRP group ID. C...

Member Since	‎01-15-2004 12:22 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6
Total Helpful Votes Received	8

User Statistics

User Activity

Converting native IOS to hybrid code

Re: Etherchannel between Switches

Re: Converting native IOS to hybrid code

Re: BlockedGigaportCount

Re: Tracing of MAC address

Re: Max number of HSRP interfaces?