I am trying to understand the meaning of 1p2q2t, 1p1q8t, etc. I just have discovered that the "p" stand for the priority queue. Any document will be appreciated.Thanks,-as
I have both in the same switch with CatOS. I reviewed the requirements of CatOS, IOS and bootstrap and the box is OK. The box work very well with the SFC2 or the FWSM, but with both of them togheter it does not reconogcize the SFC2. I guess I missed ...
We have a webserver farm working very well since two years in a CSS11000. Now we are changing to the CSM. We have deployed the scenario with the CSM exactly the same as the CSS11000 to test it before production. When we compare the download speed fro...
Now we use change audit to record every configuration change in routers or switches. I would like to send to e-mail the same information that the "24 hours report" has about configuration changes. Does any body know if it is posible?thanks in advance...
This document is the one that confuses me:http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bf98.shtmlHow do I know when the queue is tail drop o WRR? -as
That command is for CatOS (set port security auto-configure enable). The example is for and IOS switch. I have never configured security in a port, but I guess the answear of gpauwen is correct. -as
I guess your VLC server is in some of the 3 interfaces. Your config seems ok. Try this commands: ! To see the pim interfacessh ip pim inter! To see the groups, you should see your clients asking for joining the groupsh ip igmp group! You should see t...
I think this link can help you:http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2010.htm I am not a ISDN expert, but if you put different dial strings in the dialer interface it think if the first number is busy, it will automatically dial...