About trush

trush · 07-05-2005

Hi, Does anyone know how to return the SNMP ifSpeed/ifHighSpeed on a e10/100/1000 port (portType=61). I find that ifHighSpeed returns 1GB no matter what the port speed is set to.MIB portAdminSpeed does return the correct speed however this doesn't he...

trush · 03-09-2005

It IS possible to return the port duplex setting on a CatOS switch using SNMP.port duplex OID = 1.3.6.1.4.1.9.5.1.4.1.1.10.portindexHowever within an IOS switch (6500 with Sup720) MIB I can not find the port duplex OID. Does anyone know what it is or...

trush · 08-17-2003

What MIB value do we use to return the duplex status on a C4506. Is it possible to return the auto-config status of the switch ports also?IOS: cat4000-is-mz.121-19.E.binThanks in advice for any help.

trush · 06-24-2002

I have been presented with the following output from the command'show ip topology summary'I am very interested in the Quiescent interfaces and what this really means. Interfaces that are quiet or doing nothing?I can not find much information on this ...

trush · 06-22-2002

I'm writing some Perl script including SNMP and I'm interested to know if there is a MIB value(s) that provides the equivalent of 'show CAM Dynamic 3/4' on a Cisco switch. I am aware of the following link http://www.cisco.com/warp/public/477/SNMP/cam...

trush · 07-11-2005

OK, sort of stumbled on a win situation (I hope). I found if you use OID portAdminSpeed to return the speed it worked on non autoconfigured ports. If it is autoconfigured it returns one(1). If I get a return value of one(1) I then check OID ifHighSpe...

trush · 03-09-2005

Steve, thank you for your reply.How about the C4506 IOS switch?Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(19)EIt does have the dot3StatsTable, but does not have dot3StatsDuplexStatus.Any thoughts on that one?RegardsTom Rush

Member Since	‎06-22-2002 08:44 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	7

User Statistics

User Activity

IOS SNMP port speed (ifHighSpeed)

Returning Duplex setting using SNMP on an IOS switch.

Duplex MIB value on C4506 switch

Quiescent interfaces within EIGRP on an MSFC

Is there an equivalent SNMP MIB value for 'show CAM dynamic 3/1'

Re: IOS SNMP port speed (ifHighSpeed)

Re: Returning Duplex setting using SNMP on an IOS switch.