pix#1----|----7507 R#1 | pix#2----|----7507 R#2R1 and R2 are running HSRPI can not ping HSRP -ip address from pix untilcreate static arp Sniffer shows that active R1 is not responding to ARPrequest?Please help!I tryed interface comma...
It has been dicover as "general" SNMP deviceIt does not show on the list as routers 1721, for example So it can not be monitored with VPN MONITOR.How can I change attributes and monitor cisco 1711?Regards,Slad
Have a problem with controller T3 on 7505IOS level 12.2.7atrying to configured as 'no channelized'.so :TORRTER02(config)#controller t3 6/1/0TORRTER02(config-controller)#no ? cablelength cable length in feet (0-450) clock Specify the clock s...
As per cisco docsI have tryed to break with ctrl c on console after reboot.It did not work with win XP or win 2000Please help Regards,Sladjan Stefanovic
Have a problem with redistribution . We have 2 data centers with VPN 3000-s.OSPF routing in our core. VPN concentrator #1 has static route pointing to remote site with metric 1. VPN concentrator #2 has static to same remote site with metric 10. Both...
sh standpoints to one Active router R1and one Standby router R2.everyting looks normal.I am going to open Case It must be something very simple....Regards,Slad
Ping works with interface IP addressping to HSRP IP address not.There are 4 switches in this switch environmentIt was 2 before , we have replaced switches this weekend , and it did stop working that night....It is not just PIX it looks like we have t...
Question realy is :What kind of keep alive is going from one IPSec peer to remote IPSec peer?Is there keepalive ? I do agree with you...It looks to me that there is no config problem.So it must be load. Once peers can not see each other we have this...