About jtaylor

jtaylor · 04-27-2004

My current configurations are as follows,Cisco 831 configsCisco831>enPassword: Password: Password: Cisco831#show runningCisco831#show running-config Building configuration...Current configuration : 1443 bytes!version 12.3no service padservice timesta...

jtaylor · 03-16-2004

Cisco 83112MB Flash Memory32MB Dram MemoryI am not able to get to any command prompt but rommon mode because of the message I'm recieving during boot.. See below.boot: cannot determine first file name on device "flash:"So I am attempting to push a ne...

jtaylor · 03-15-2004

Hello all, I'm having a problem with Xmodem failures on a cisco 831 from romon mode. The message from secureCRT is "Xmoden operation was canceled by remote peer". Also from the router I'm seeing the message "Timeout waiting for data - aborting downlo...

jtaylor · 03-14-2004

I have a Cisco 831 which I'm assuming has a missing IOS.When I power up the router instead of going through the normal POST; and for lack of a better term it's putting out a bunch of goble-di-goop..I am unable to type in any type of command using the...

jtaylor · 03-11-2004

Ref cisco 831 router,I was having with the CRWS hanging in IE so I desided to load the latest ver of crws. After I rebooted the router the outputs are listed below. The question I have is, is there a way to recover from this mistake or is my router h...

jtaylor · 04-28-2004

GP,Thanks for taking a look at this, i'll add the route and let you know how it goes..Thanks Again,JT

jtaylor · 03-16-2004

Georg,I believe the reason I am getting the xmodem failures is because I don’t have enough dram remaining for the ios image size.Is there a way to delete files while in Rommon mode?I am asking this question because rommon is the only command option I...

jtaylor · 03-16-2004

Thanks for responding.Before you responded I was able to get to rommon by changing the baud rate in my console software.However this is currently where I am with trouble shooting.By the way I have 12MB flash and 32MB DramI'm having a problem with Xmo...

jtaylor · 03-16-2004

Hello Georg,Thanks for responding.I have not made any baud rate changed from the router. I have only changed the rate in secureCRT.Once I'm in confreg, is there a particular buad rate that works more often than not?Thanks again,James

jtaylor · 03-15-2004

From rommon,when I do the commanddir flash: and not see the file 0x2102, will performing confreg 0x2102 will allow me to boot to the correct ios?Please advise,James

Member Since	‎07-14-2002 08:15 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	13

User Statistics

User Activity

Trouble getting to www with my Cisco 831 and Cisco Pix 501

Delete files while in Rommon

Xmodem failure on Cisco 831

Missing IOS

Corrupt File Possibly

Re: Trouble getting to www with my Cisco 831 and Cisco Pix 501

Re: Xmodem failure on Cisco 831

Re: Corrupt File Possibly

Re: Xmodem failure on Cisco 831

Re: Corrupt File Possibly