Hi all,I have a Cisco 5400 router with 4 E1 ports, used for origination. Is it possible to bind a specific pots dial-peer (or voice-port) to a specific voip dial-peer? in other words:-all calls received from E1/0 should use dial-peer 100 voip-all cal...
Hi all,i need to monitor a Cisco router with MRTG, so i need to know the OID of the total number of calls, duration and other details.Is there a list of OID that I can use?Thanks,
Hello all,I have a SIP server NATted behind a PIX 515e (IOS 6.3). The problem is that endpoints will register with the SIP server only if I remove username/password authentication. If I remove the natting (SIP server and endpoint can directly connect...
hi all, in my logging, i'm receiving a disconnectcause=66, 1F, 22, 29. Anyone has any clue about what could the problem be and how to fix it? Thanks, Marc Khayat
hi all,in my logging, i'm receiving a disconnectcause=66, 1F, 22, 29. Anyone has any clue about what could the problem be and how to fix it?Thanks,Marc Khayat
Hi Mak,For the following scenario for example:PSTN -- VoIP Router -- internet -- VoIP Router -- PSTNthe source address is the IP address of the gateway (interface to the internet), so is the destination address.Marc
Hey all,not only you can change the port of h.323 signaling, but also the voice call ports...i'll think of something and try to get back to u :)Good luck!!!
Hi Jake,Are you sure the ip address on the outside should be 172.18.4.25/32 or /16?If you're sure about the above config, make sure that you've opened ports on the outside interface to access the web server:access-list out_in permit tcp any host 172....
Hi there,i'll try increasing the timers and see if it works. Meanwhile, here's a part of my CDRs:2004-07-05 14:28:06,Local7.Notice,xx.xx.xx.xx,"84941: Jul 5 10:13:01.717: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 12345678 CD8911D8 9D...