Hi,I have four distribution facilities, which are not large. I have Cisco routers in these sites configured with DHCP servicing the staff at each location.The problem I have is when these routers go down, all DHCP bindings are lost.I know I can confi...

I need to setup a hairpin on my PIX running 7.2 PIX-OS. I have the configuration set but this isn't working. I need to do this because we are moving a critial host (172.16.100.62) to another network in another facility and listening on a new IP addre...

Hi,Is there any way to have the DHCP bindings on routers to be saved to :nvram or a flash device so that then power is lost and the router reloads, I don't have to manually enter the bindings?RegardsJeff

Hi,Scenario; Network: New York = 172.30.7.0/24Network: Washington = 172.30.8.0/24Network California = 172.30.9.0/24Network: new Location = 172.30.10.0/24WAN Mesh = MPLSNew York facility (Users, packaging, warehousing, etc) will be systematically movi...

Hi, I've only picked up on this Cisco Global Site Selector product and have a need to delve deeper into this technology. From a quick review, this seems quite expensive. Ar ethere different models and does the cost variance accordingly?All I need to ...