Hi, Can you please do "debug client <client MAC Addreess> " on the controller CLI, then try to reproduce the issue with the same client that you are debugging, and then paste the outputs here? Also can you please provide the configuration of the inte...
Hi Jorge, you can refer to the link below: http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/115951-web-auth-wlc-guide-00.html#topic2 This is the official link for how to configure customized web authentication bundle and how ...
Hi Ahmed, There is no issue with adding the devices behind the firewall, but you need to make sure that the ports that are used between the WLC <-> MSE and MSE <-> WCS are all opened. You can refer to the link below which is showing the needed ports ...
Hi Olivier, The error messages that you have on the debugs:*Dec 12 09:24:49.659: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.*Dec 12 09:24:49.659: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.*Dec 12...
Hi Serge, Thank you for the reply.For the new license, as I can see it is 15 AP, and what I am sure about that you need 40 AP, and you purchase this license to increase the AP count, but in fact you cannot install license with lower AP count than th...