I am trying to change the inside IP address and DHCP range on a PIX 501. The PIX 501 is running 6.3(5) with PDM 3.0(4). When I enter the cli command:ip address inside 192.168.3.1 255.255.255.0The PIX replies: Interface address is not on same subnet a...

We have more than one ACL defined. access-list 120 deny ip 192.168.1.0 0.0.0.255 192.168.0.0 0.0.0.255access-list 120 deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255access-list 120 permit ip any anyaccess-list 130 deny tcp 192.168.1.0 0....

Background: We have some older hubs in our network. As such, we cannot implement a VLAN yet. We have a 10/100 ethernet network across our campus for our production users. We have multiple buildings on the campus and one physical network. We are insta...

We are unable to issue the command "show ip port-map".We logon to the router. Issue "enable". Get the privileged exec command prompt (router8#). When we issue "show ip p?", the list returns "pim", "policy", "prefix-list" and "protocols". But, no "por...

We have a 1700 router running v12.3. The router has one 1ENET interface card. This connection is going to a wireless ISP. From the router, we can ping to the inside addresses and to the outside addresses. From our inside addresses, we cannot ping pas...