Hi Experts, I have a challenge where i would like some suggestions and inputs to help me design this right with security in mind.
I have two microwave connections landing on switchs with two separate cables (Gi 0/0 and Gi0/1) configured as Trunk...
Hi Team,
I have a requirement where i need to do some QoS based BW allocation.
I have a 500M circuit, which needs to be split into 300M and 200M and routed down to LAN.
How can i achieve this?
!access-list 100 permit ip <Public IP2> 0.0.0.3 a...
I would like to know if there is any reference for a good end to end WLC CLI Configuration tool or guide or reference.
I am currently turnning up a WLC using the initial config bu assigning an IP address for management and then, configuring the WLC...
Sample config.
Router#ip route 0.0.0.0 0.0.0.0 1.1.1.1 <-Default Route for all traffic to WAN Link 500M circuit
Public IP space :
2.2.2.0/28
int gi 0/0
no shut
!
Int gi0/0.2
encapsulation dot1Q 2
ip address 2.2.2.1 255.255.255.252
!
Int gi0/0.3
encap...
500M circuit comes from service provider, who has provided Public IP for LAN block. We want to provide Internet access to a sub group who needs internet access. Hence need to split/restrict the BW to 200M
