About AndreasJo

AndreasJo · 02-23-2010

Hi,I have a windows service that automatically connect to different vpn-servers before traffic flow through the tunnel. The problem is that no one is logged in to the machine at the time the VPN-client is making the connection, which results in diffi...

AndreasJo · 06-27-2008

Hi,I'm trying to set up a 2811 as modempool with Dialout/Ez on the client. The problem is that the connection is terminated upon establishing the connection.Sometimes it doesn't even show the login prompt to the remote RAS-server, and other times a l...

AndreasJo · 04-13-2008

Hi!I would like to protect the host that initiates the VPN connection from the VPN network, but can't think of a way to do it.It would look something like this:VPN connection with firewallVPN-client---->SPI-firewall----->Tunnel---->VPN-serverThis is ...

AndreasJo · 12-07-2006

Hi!I'm trying to set up static translation from outside my network in to DMZ. I have tried both with nat, global and using static but have failed using both. The problem is that the packets are getting through to the servers in the DMZ but nothing is...

AndreasJo · 06-30-2008

Thanks, it did the trick and sorry for not RTM.Kind RegardsAndreas

AndreasJo · 04-18-2008

As I said in my first post, I don't have access to the servers, only the client application. The servers aren't within the organization, therefore I want to protect the organization network from the one on the remote end. Another thing that makes thi...

AndreasJo · 12-19-2006

I found the problem. It was a faulty VLAN configuration on the switch between the DMZ and the ASA. I changed the switch and now it works. It took a while to figure it out though since the traffic was working from Inside to DMZ.Thanks for all the help...

AndreasJo · 12-14-2006

Yes it would.But I have tried the idea using static again. And it doesn't work either. I get the same error as I got the first time. Syn timeout and untranslate when trying to access the web server in DMZ on outside ip 192.168.14.5This is the conf I'...

AndreasJo · 12-11-2006

That makes sense if you are able to only use the external IP and map inside. But if you use the external IP only as a default route from the ISP. Then have a pool of public IP:s in the DMZ. And you don't adress the external public IP but instead a pu...

Member Since	‎12-07-2006 11:29 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	11

User Statistics

User Activity

Unattended VPN-client connection

2811- PVDMII-24D, login issue

Firewall on VPN-client.

Static or nat from outside to dmz?

Re: 2811- PVDMII-24D, login issue

Re: Firewall on VPN-client.

Re: Static or nat from outside to dmz?

Re: Static or nat from outside to dmz?

Re: Static or nat from outside to dmz?