I can't ping my own IP address on switch Cisco2960. I have an identical configuration with exception of IP addresses on it's partner primary switch but I can't ping the IP address of the secondary\backup switch and I could ping the IP address on prim...
I need help to identify the device that's generating this error or find where is this coming from...“<Err dts="10/28/09 23:46:47" dtl="1256795207" source="drop200" priority="1" identifier="192.168.128.1">814: .Oct 29 2009 05:46:30.412: %CRYPTO-4-RE...
I need help to identify the device that's generating this error or find where is this coming from...“<Err dts="10/28/09 23:46:47" dtl="1256795207" source="drop200" priority="1" identifier="192.168.128.1">814: .Oct 29 2009 05:46:30.412: %CRYPTO-4-RE...
I am getting this message...“<Err dts="10/28/09 23:46:47" dtl="1256795207" source="drop200" priority="1" identifier="192.168.128.1">814: .Oct 29 2009 05:46:30.412: %CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac verify failed for connection id=3003 local...
I had to recover a password and go to rommon mode and able to load a new IOS for my router 2811 but would not successfully load and save my configuration.Can anybody help me on how to fix this and tell me what's going on.Thanks,June
Reza,Yes, they are all in up mode. I could actually ping the workstations connected in the backup switch from a different location but not the backup IP address.I'll try to check tomorrow the "sh ip int brie" shows" tomorrow when I get back at site.R...
Reza,Please see the configuration below...(primary)interface Vlan1 description 1X00507G24-2960.0401 ip address 192.168.83.33 255.255.254.0 no ip redirects no ip unreachables no ip route-cache load-interval 30(backup)interface Vlan1 description 1X0050...
